Friday, December 18, 2015

Magic knife holder








Originally I made the magic knife holder for knives but also found it handy in the workshop for tools. Children are also having fun with it, putting on spoons and metal toys, so I had to make 2 of them. I will probably make a few extras for gifts.




 

           For the base I cut some mahogany and glued two pieces together. 
     This will give me a solid base and will also look better.   
                                                                                                                                                  






   After the pieces are dried I ran it through the table saw to clean it up and then  tilted the blade and cut some bevels on it, this gave it a more pleasing look.                                                                                                           
                                                                                 





The next step is to build the slide with the magnet. Basically it is just a small block of wood that fits the magnet and a hole to slide on the dowel. 
                                                                                       

 The two pieces below are marked, clamped and drilled together, this will keep   everything lined up and straight.                                                                                                                                                                        







To install the magnet first mark the position where the magnet will go and make a center punch mark, I used a forstner bit and tapped it to get the mark. Then it was taken over to the drill press and drilled the depth of the cup.                                                                                                        




A magnet cup is used to increase the attractive power of a magnet, normally it will increase the strength by a factor of 4. Magnets and cups are available at  Lee Valley                                                                                                                               

                                                                


Note -    a slot is cut in the cup,  this will make it easier to take the magnet out of the cup if you ever have too.                                    

























Here is a close up of how it looks. The slide is friction fit and will move along the long dowel easily but with enough grip to keep it in place. 









The spring slide block

The second knife holder I made I used a spring loaded system for the slide. It is similar to my  Dowel stop gauge, and not that difficult to make, just a lot of measuring, drilling and fitting a small spring.   









First drill a hole in the sliding block to fit the long dowel. Next, drill a hole in the side of the sliding block, then place a small piece of dowel in it and drill that one. 


Now drill the block a small amount more then clamp it and drill the small dowel a second time, this will make an oval hole.                                                         

Lastly drill the block a third time and this will be for the spring. I just found a spring and cut off a small piece and tested it and it worked great.                  
   






The slide with the spring system may be harder to make but it will ensure that in time the slide will always have a strong grip.
















The small and long dowels are both cut with my new bandsaw sled . The dowel is glued and tapped into base and the slide block is put on. 






The magic holders are easy to make and will sit nice on the counter in the kitchen or a workbench in the shop. I did not give the measurements for the length of the long dowel since it will depend on how long your knives are. The length I used was around 38 cm.










Here are the dimensions for the spring loaded magnetic slide. For more details please see the video on how it was made.                                                                          



Conclusion


I hope this step by step article and the video will help you build your own.

You can build this easy project in a small workshop or even in your kitchen with very few tools.




See also:


     Scroll holder                 Kitchen utensil holder                  Country cabinet

           







25 comments:

  1. I forgot to mention I am on Facebook, Instagram, Twitter and Google+. Find me there and let me know what you think, and if I can help you anyway let me know.

    ReplyDelete
  2. Hey Jack, love this idea and I would like yup make one these for my 13 in chefs knife that weighs about 9 lbs. Which size magnet would you recommend geting from Lee valley? Thanks, Russ

    ReplyDelete
  3. Normally, these are usually nothing more than a tilted block of wood that allows the blades to be inserted into them, allowing the handles to protrude for easy access. This has been the classic knife holder design for generations and there have only been a few slight changes.

    ReplyDelete
  4. Before you buy your next hunting knife sit down make a list of what you expect out of the knife you want to buy. That perfect knife is out there somewhere! You may end up with several knives for different applications. The main thing to remember is you need a good knife as bad as you need your hunting permit!My blog

    ReplyDelete
  5. You can find magnetic knife blocks at all leading department store retailers as well as on several online retail sites. The advantage of having a magnetic knife holder is that it has the ability to accommodate any type of knife, no matter what the size and shape of the knife is.

    ReplyDelete
  6. Check the maker's site or call them and get some information about the knife you are keen on. https://bestbowieknifeonline.wordpress.com/

    ReplyDelete
  7. Knife collector clubs are a great place to share information about certain knives and even a place to swap a knife or two. A great place to find special knives are Gun & Knife shows.go right here

    ReplyDelete
  8. I found so many interesting stuff in your blog especially its discussion. From the tons of comments on your articles, I guess I am not the only one having all the enjoyment here! keep up the good work... heavy duty electric fillet knife

    ReplyDelete
  9. I think this is an educational post and it is very helpful and learned. sea cargo to india I found so many exciting stuff in your blog abnormally its analysis.

    ReplyDelete
  10. I believe this is an informative post and it is very important and read. pmc.sg I found so many exciting material in your blog abnormally its report.

    ReplyDelete
  11. It is something unique product, I really wonder to but this. I was searching this kind of product on https://www.digital-marketing-library.com/ and I found your website that give suitable product for me.

    ReplyDelete
  12. I should state that general I am truly awed with this blog. It is easy to see that you are enthusiastic about your composition. I am just following your compostion style for https://www.whatsappsociety.com/ to make more useful content.

    ReplyDelete
  13. This information is so great to get in for learning. Thanks for providing such good content.

    ReplyDelete
  14. Life is about growing smarter and more fulfilled and magic tricks can provide a fun, compelling experience that will strengthen the mind and result in a smarter, more focused child that also is able to perform magic!playing cards

    ReplyDelete
  15. I am reading your post on the favourable topic you shared with us I liked it,Here I share a site on cheap mobile phone repairs Where you can repair your phone on cheap prices I hope you liked it Thanks author for sharing such post with us.

    ReplyDelete
  16. Hello there author,I am perusing your post on consistent schedule however this time your post is amazing,Here I share a site on فروض I hope this site is benifit for you I hope you like it much obliged.

    ReplyDelete

  17. I like the information you shared with us I am very obliged, here I share a site on flood damage repair I think you like it if you are interested in it, Thanks.

    ReplyDelete
  18. captivating post! I expectedly don't look at overpowering presents offering little appreciation on when I started seeing this article! it kept me looking light of the way that the way wherein where it made I figure anyone would be seen as it to interest and enlightening! Spreading karma! medical marijuana doctor This is a medical site offering medical services. You can get good treatment from a good doctor in New York.

    ReplyDelete
  19. A very inspiring site
    Here you can find top beautiful places in Pakistan https://beautifulplaces.pk/

    ReplyDelete
  20. This comment has been removed by the author.

    ReplyDelete
  21. Regardless of whether you are right now without a knife block set or hoping to update from a current modest set, discountknivesnova.com

    ReplyDelete
  22. I have been absent for a while, but now I remember why I used to love this blog. Thanks, I’ll try and check back more frequently. How frequently you update your web site? folding camping knife

    ReplyDelete
  23. Professionals prefer Santoku knives that have a tang. Most knife sets in the market today offer these features with utmost quality. A wide selection of professional knife sets is currently being introduced by topmost manufacturers worldwide. knives for sale

    ReplyDelete
  24. I have read all the comments and suggestions posted by the visitors for this article are very fine,We will wait for your next article so only.Thanks! find out more

    ReplyDelete