Thursday, November 20, 2014

Multi blast gate box for vacuum









I use my shop vacuum for some of the machines in my shop and thought it would be easier to leave hoses attached instead of switching them  back and forth so  I made this multi blast gate. The gate slides easy even with the vacuum on.
















To make a box I first  take  some measurements. I place a hose in the vacuum cleaner and use a Wixey gauge to get the angle and it is 14  degrees.....

....and the diameter of the hole is 2 1/4 ".






The box is made  of  scrap 3/4 "plywood I find in my shop. I cut four pieces to  8 1/2"x5".






A drill press is set up with guides and an angle of 14 degrees. I am now ready to drill the hole using a 2 1/4" hole saw.











The piece is tested and fits nicely into  the vacuum. Now the rest of the box can be built.







To cut the two inner pieces I first drill a hole large enough to fit  the jigsaw blade then continue to cut the pieces for the box.











The pieces are laid out and ready for gluing. I use Titebond and clamp it and let it set overnight.










For the front  I use one of the pieces of plywood and this time lay it flat and drill  two holes again using the 2 1/4' hole saw, these will be for the hoses.




The front is screwed on just in case the unit has to be taken apart.
The gate is cut to size and fits perfectly in the slide.


I drilled and cut some rings for the face of the unit. They are glued on the box and will  give more support for the hoses.
 Ready for paint...

This is the back side with the hose connecter masked up.
The gate has a hole drilled in only one side at 2 1/4". When it slides in the box the hole lines up exactly to the right side hole. A small piece of wood with a dado cut was glued onto the end of the gate for a good grip.









The hoses are attached to the vacuum and the other ends to the bandsaw and drillpress. Both work great and the gate makes it easy to switch over from one machine to another.
















See also:

Dust collector arm                              Make a clamp                                     Table saw safety stop


                                                            



16 comments:

  1. In a word awesome

    ReplyDelete
  2. Hello Jack,
    What a nice post it is! Your writing has explained a lot about Multi blast gate box for vacuum. I really happy to read. Great work. Carry on. Thanks.

    ReplyDelete
  3. A revolving brush removes dirt particles from a carpet. This option is useful for picking up pet hair.
    Dwayne

    ReplyDelete
  4. They do a thorough and detailed comparison of vacuums cleaners and summarize their findings.
    best robot mop

    ReplyDelete
  5. Thanks for info about Multi blast gate box for vacuum. Love it!

    ReplyDelete
  6. There are also a number of other, secondary specifications that influence cleaning ability that we'll also examine. upright vacuum cleaner

    ReplyDelete
  7. I wanted to thank you for this excellent read!! I definitely loved every little bit of it. I have you bookmarked your site to check out the new stuff you post. best shark vacuum for vinyl plank floors

    ReplyDelete
  8. Excellent effort to make this blog more wonderful and attractive. best car vacuum cleaners

    ReplyDelete
  9. In this case, the gate specialist organization had as of late dealt with the gate, and with an end goal to assuage the apartment suite top managerial staff to keep various vehicles from "piggy sponsorship" while entering the parking structure, the repairman had quickened the end pattern of the gate, making for an erratic and conflicting shutting time. automatic sliding gate system

    ReplyDelete
  10. Great job for publishing such a beneficial web site. Your web log isn’t only useful but it is additionally really creative too. compression bags

    ReplyDelete
  11. The Sort An Allergen Sack, the Sort C Pack, the Essential Channel, and the Floormate Channel. When you discover the vacuum cleaner part that meets your individual requirements, you can choose it, add it to you truck and checkout. www.bestestofzuiger.com/

    ReplyDelete
  12. Thanks for info about Multi blast gate box for vacuum. Love it!

    Okinawa Flat Belly Tonic

    BioFit Probiotic

    ReplyDelete
  13. You need your wedding outfit safeguarding to forestall and shape, mold or bug development or pervasion. This must be ensured when you utilize the Sealed Boxed technique - see that part under "Wedding Gown Preservation strategies".
    air duct cleaning near me

    ReplyDelete
  14. In the event that you like music, paying attention to a tune with a solid beat is an extraordinary way of keeping your force up and your psyche diverted - this can assist with keeping you from getting exhausted. limpiezas zaragoza

    ReplyDelete
  15. Awesome blog article. Much thanks again. Much obliged. price of vacuum oven machine

    ReplyDelete