Thursday, November 19, 2015

How To Effortlessly Make A Secret Compartment In A Book



Secret compartments are great for hiding things whether you are a child or an adult. People are fascinated by secret doors and hidden compartments.

With some basic woodworking tools you'll learn a new way how to make secret compartments in books very fast and easy.















  There are other ways to do this that require utility knives and rulers and cutting out a few pages at a time to get your desired  depth of the compartment. It does not always look nice and takes a lot of time. 



  This way is different and requires a few basic woodworking skills and tools. It can go very fast and you can do a few books in a very short time. If you have a drill press it will go even quicker.




     Tools Needed -  Drill, Clamps, Wood and Hole Saw







                     
 A cordless drill will work for the holesaw but some care must be taken.  Some corded drills may have too much power and it would be harder to control. Always be careful for kick-back. Of course the drill press at a slow speed would be the best.

 The items and steps shown below can be used for both the cordless drill and drill press.  

































   Wooden hand screw clamps are inexpensive and are a very handy tool to have. These clamps have a deep throat  and can hold odd shapes easily.









   















  Two pieces of wood are used to hold the pages, they should be large enough to cover the whole page. This will give you best results by keeping everything tightly clamped and also give you enough room for the hole saw. 

                





























Hole Saws or hole cutters are a saw blade that cut holes in a workpiece. By securely clamping the wood to the pages the saw will cut through the top board the pages until it hits the bottom board.
  

Keep an eye on the pilot drill since it will go through the bottom board.  



Here is the first test using the drill press-





This was the first test and it turned out great. It was done with a 2.5" hole saw. Now it is time to move to a bigger hole saw and bigger books to make larger compartments. 


Second Book with the Cordless Drill-




         


  This time the cordless drill is used and three holes will be drilled. To get an idea where to drill roughly draw the page and a couple of circles where you want you holes. Here is the  first cut with the cordless drill and hole saw.                                               



  

















This is hole number 2 for the second book. The hole saw should be checked frequently to inspect the depth  and the papers inside should be removed. 




     The book has three holes drilled in it and it turned out great. A gold necklace was placed inside the secret compartment.





Third Book with the Drill Press and Timer-

The third book is done with the drill press and a 3.5" hole saw. The whole process took about 11.47 minutes. The clock was stopped a few times to empty the paper in the hole saw, but you get the idea.






After one book is drilled out a next book would be ready to go. This is a very fast way to make secret compartments of different sizes and shapes. 

In one hour many books could be drilled out.



If you find this easy to make let me know, and will you try it?



See also:

       Towel holder                         Make a Hovercraft                   Bending wood

  
                                            



No comments:

Post a Comment