Friday, May 13, 2016

Build a helping hand/ grabber



A grabber is a great tool for the workshop. With a long reach and a claw for gripping it can pick up even the most difficult looking items. It also has a magnet on the end so you can pick up small metal parts like screws, nails or those tiny drill bits.




                                  



I always try using what I find in my shop. I received a bunch of oak flooring from a friend and since it is hardwood it will work fine for this project. 
To start I ripped a small piece for the arm. 

 

The arm will be 25" long, the height 3/4" and width 3/4". For the dado I set the blade  1/2 inch high and ran it through the table saw moved the fence and then again. This gave me a thickness .35 inches.






                      Here is a template  I traced for the three parts on a 
                      8 1/2 x 11 sheet of paper.

              Grabber       trigger            handle    





The drawing on the board may look a bit rough but I design as I build. Things can always be altered and cleaned up. After cutting and sanding you can make these parts look  great.   





Small parts table saw jig                                                                          

The handle has to fit securely in the arm so I had to build this jig to hold the handle. It will allow me to cut a notch in the handle to fit snug in the arm. 




Now the handle has a correct size notch in it, it fit perfectly thanks to the jig.
It can now be glued together.




                                                                              







I wasn't sure if the handle would be strong enough on the arm so I took a precaution and added some extra sides. I cut two blanks of oak and glue them onto the handle.



After a little bit of cleaning with the bandsaw I took it over to one of  my favorite tools, a small spindle sander. This gave me a nice clean shape.






Time to add the trigger. After I lined it up I made a small mark where I wanted to drill. It is important to use a drill press to keep everything lined up.



Some finishing nails are used for the pin, they should be slightly larger than the hole then they will keep things in line and there will be no play.





Drilling the grabber...






A spring is added to the grabber. You can buy a small one or check out my video here - make your own springs .




A string is attached to the grabber and fed through the arm to the trigger..


 String is tied to the trigger







I tried to pick up my glue bottles and there was no problem




                    A 1/2" magnet is added the the end. I used Gorilla glue to hold the magnet and it worked out fine. I picked up this small drill bit, I tried some smaller bits and other small metal parts and this grabber worked great.

On the end of the grabber I used a small file to make some small notches, this will help give it a better grip.


                                   

                                   Testing picking up a pencil.






Conclusion                                                                                                       
                                 
A helping hand grabber is handy for any shop, it will make your life easy and can save your back. I think you will get a lot of use out of it. The magnet and the gripper both  work great. Whether you are picking up a small tool or a small nail. 


This is a handy tool for the workshop or for the home. 

I hope this step by step and the video will help you to make one.                                                                                           



 See also:

     Magic knife holder          Large compass            Mini speed square

                                                        









21 comments:

  1. Make sure things are within reach. If you can't reach it, try getting a grabber reacher. These are available at many stores and cost less than $20.

    ReplyDelete
  2. Having the wing nut, the frame is used to provide tension. The blade of these hand handle tools is commonly assembled at right angle to its usual position unisersal magic hand saw

    ReplyDelete
  3. This comment has been removed by the author.

    ReplyDelete
  4. While they're really cute and attractive, many people wonder what's more important: the caliber of a pink (or purple) tool set, or its novel and unique appearancecraftsman tool kit

    ReplyDelete
  5. Thanks you very much for sharing these links. Will definitely check this out. http://fifa15coinsjoy.com

    ReplyDelete
  6. This comment has been removed by the author.

    ReplyDelete
  7. Interior decorating then again is the procedure of really blending and coordinating the diverse design systems like window medicines, the correct backdrop, divider complete and even the outfitting of a room. canvas prints for kitchen

    ReplyDelete
  8. You is probably thinking whether or not or now not it's far feasible to have privateers and have the fence appearance as aesthetic as viable. well, it's miles. This has may be explored further later on. Having a very good concept of what you need in a fence should ensure which you have razor-sharp consciousness whilst deciding on properly vinyl fencing you can check here.

    ReplyDelete
  9. Allen torques and the air ratchet torques are the two most fundamental tools however the air ratchet wrench is utilized for harder employments. best truck tool box

    ReplyDelete
  10. Positive site, where did u come up with the information on this posting?I have read a few of the articles on your website now, and I really like your style. Thanks a million and please keep up the effective work. loppers

    ReplyDelete
  11. Thanks for the blog loaded with so many information. Stopping by your blog helped me to get what I was looking for. hand sanitizers in uae

    ReplyDelete
  12. I was reading some of your content on this website and I conceive this internet site is really informative ! Keep on putting up. corporate lanyard

    ReplyDelete
  13. Even more of a selling point is how easy they are to use; just apply over all surfaces of hands and fingers, then simply massage gently until hands and fingers are dry. hand sanitizer dispenser

    ReplyDelete
  14. Thanks for taking the time to discuss this, I feel strongly about it and love learning more on this topic. If possible, as you gain expertise, would you mind updating your blog with extra information? It is extremely helpful for me. Leander tx dumpsters

    ReplyDelete
  15. Thanks for taking the time to discuss this, I feel strongly about it and love learning more on this topic. If possible, as you gain expertise, would you mind updating your blog with extra information? It is extremely helpful for me. dumpster rental Lakeway tx

    ReplyDelete
  16. "The practice of landscape design involves site analysis, development of design concepts and design plans, selection of construction and plant materials, and preparation of construction plans and documentation. Landscaper Wylie TX

    ReplyDelete
  17. Related Articles and Stories can be found at the author's blog about Catalonia Spain budapest rentals

    ReplyDelete
  18. A too weighty mallet may mark, break, annihilate a sensitive wood or curve a nail or pin.hand tools

    ReplyDelete
  19. Wow i can say that this is another great article as expected of this blog.Bookmarked this site.. Truck Tool Boxes

    ReplyDelete
  20. The financial institution wins the coup once more, the on line casino takes €156 commission leaving €6084 for the next financial institution. Player A decides that that is extreme quantity of} to threat and retires, reclaiming the €350 reserve from the croupier for a total of €6434. Now the opposite gamers are provided the chance to take over the financial institution. The subsequent two gamers B and C refuse, however participant D is 우리카지노 keen to place up the required stake of €6084 for the next coup. The gamers bet a total of €4600 in opposition to this and the banker loses the coup and pays the gamers. D loses the financial institution and retains just the €1484 that was not lined by participant bets.

    ReplyDelete
  21. bro what is the spring size my triple og

    ReplyDelete