Friday, September 23, 2016

Can Paper Cut Metal?


Can Paper cut metal?  After watching John Heisz's video "Can Paper Cut Wood" I was intrigued and thought about what else it can cut. I wanted to try something different so I came up with this idea of cutting metal with playing cards and using a router. 
   




The router spins up to 30,000 RPM which is necessary for a paper blade to cut metal. It needs to spin fast to work. As for the metal, I will be using an aluminum can, it is a soft and malleable metal.






         









Make a paper saw blade

The first part to make would be the 1/4" shank. A piece of threaded rod works best for this. 
Quick tip;  Bolt cutters are used to cut a piece of threaded rod to the desired length. It cuts easy and you don't have to pull out the hacksaw.




I used my new Belt Sander and took off the rough edges of the threaded rod. This will look better and make it safer to handle... and makes it easier to put the nuts on.





For the saw blades I will be using playing cards. I used a compass the type with two points and cut out a couple of blades. Several blades will be made since they will wear out quickly.






To enlarge the hole for the 1/4" shaft I used a punch, this is the same size as the threaded rod that will be used.






The router setup.   A Makita compact router and table will be used. This is a very handy table for small jobs.

 The paper blade is put on the  threaded rod or shaft and tightened with a couple nuts and washers. Two wrenches are used to make sure the nuts are tight, then it is placed in the router collet and tightened. Keeping the blade low to the table seemed safer to me.



This was the first cut, it was very clean and cut fast up to a point then the blade would wear quick and start to wander. 






The blade wears out very quickly because the aluminum can is very sharp and will cut the paper, also friction will cause the paper to burn.








It took three blades to cut the can. The blades are easy to make and exchange. 










Conclusion

Making saw blades from paper is very interesting, and to find out if they cut metal was incredible. This was more of a test to see if it would work. I probably would not make any more but I always like to experiment.   

If you want to make your own paper blades this is very easy. Let me know if you do. 


What else do you think paper would cut?




You may also like:

            Marble Spring Gun        Diamond plate toolbox          Wood Clipboard 

        


28 comments:

  1. Needle-nose pliers, also known as long-nose pliers, have a long and narrow jaws. https://www.rykerhardware.com/ These pliers are designed to cut heavy gauge wire, nails, and bolts.

    ReplyDelete
  2. Maybe the fundamental thinking behind the developing business sector is pleasing fire codes requiring heat proof waste compartments all through specific structures. Abbotsford Fencing contractors

    ReplyDelete
  3. And it helps to be able to adjust the height of the board easily, if smaller members of the household want to iron clothes, Portable ironing boards have a disadvantage, though, in being awkward to set up and cumbersome to move around. small ironing board

    ReplyDelete
  4. The most important and integral part of metal casting is the mould. The mould is essentially what the product is going to be. These moulds are manufactured in a foundry. Manufacturers take their dimensions, microfusione sketches and ideas for the mould to the foundry where the moulds are produced.

    ReplyDelete
  5. As referenced the framework utilizes an enormous loop of welding wire rather than short welding bars.weldinginfocenter.com

    ReplyDelete
  6. This is certainly as well a really good posting we seriously experienced looking through. It is far from on a daily basis we have risk to check out a little something. casting foundries in china

    ReplyDelete
  7. Great job for publishing such a beneficial web site. Your web log isn’t only useful but it is additionally really creative too. Mining Dispatch

    ReplyDelete
  8. This site generally bases on performers, and the whole interface is practically like Backpage. The landing page shows an assortment of US urban communities and nations. A few urban communities have hundreds, and the more articulated ones have thousands. If you want to know more, Please check out here - backpage equivalent

    ReplyDelete
  9. I was surfing the Internet for information and came across your blog. I am impressed by the information you have on this blog. It shows how well you understand this subject. DXTECH

    ReplyDelete
  10. It assists you with fund-raising. It likewise gives you achievements to measure your prosperity.HispeedLaser

    ReplyDelete
  11. Some credit repair services are outright frauds. Others who have guaranteed clients result have succeeded in what they have promised. What does this tell you about the credit repair industry? PTFE Hose

    ReplyDelete
  12. Looking forthreesome websites ? Then we are the best for you, who suit your expectations. We have huge experience on this field. We are 100% dedicated to find you threesome websites.
    You can find threesome websites here and here are numberius clients buy our products
    If you want to know more, Please check out here - threesome finder

    ReplyDelete
  13. Looking for Kamagra gel? Then we are the best for you, who suit your expectations. We have huge experience on this field. We are 100% dedicated to find you cheap pKamagra gel.
    Kamagra Gel is the most convenient and effective solution for improving and strengthening sexual function in men. You can buy Kamagra gel here and here are numberius clients buy our products. We are provide only high quality Kamagra gel for you with always customers support.


    If you want to know more, Please check out here - kamagra in israel

    ReplyDelete
  14. there are many other applications where aluminum is used, but one of the greatest resources I can advise a person to find it is motors. There are many components under the hood of a car which are made from aluminum.Best Paints for Corrugated Metal Roof

    ReplyDelete
  15. This comment has been removed by the author.

    ReplyDelete
  16. I am all that much satisfied with the substance you have specified. I needed to thank you for this extraordinary article. read about how to cut aluminum gutters

    ReplyDelete
  17. In the event that you couldn't say whether your website is responsive.
    onohosting.com/

    ReplyDelete
  18. If you will be in a great deal of brush, you probably won't want a high-powered round designed to travel long distances. Conversely, Shotguns for sale in Jonesboro Arkansas

    ReplyDelete
  19. To demagnetize metal using this method, place the object in a pot of boiling water. https://metalprofy.com/blog/what-is-the-weakest-metal/ The method required to permanently demagnetize metal will vary depending on the type of metal.

    ReplyDelete
  20. This comment has been removed by the author.

    ReplyDelete
  21. Many fencing organizations center around steel fencing items.
    Aurora Fence

    ReplyDelete
  22. It was definitely informative article you've done.

    ReplyDelete
  23. Informative article you've done. This site is very useful. Thanks

    ReplyDelete
  24. Hi! I like to give you a huge thumbs up for the great info

    ReplyDelete
  25. Huge thumbs up for the great info right here, Love it

    ReplyDelete
  26. You provide the correct information here I really bookmark i

    ReplyDelete
  27. You make so many great post here that I read this article twice

    ReplyDelete